Incorporate Skylights in Your Roof Design
In modern architecture, both light and space are elements that convert a basic piece into a remarkable work of art. Architects considering affordable roofing Winnipeg use skylights to integrate natural lighting into the building.
The Benefits of Skylights in Your Roof Design
Skylights are window-like structures installed on roofs. They allow natural light into buildings. Skylights can be fixed or operable, with some allowing for ventilation. Skylights are becoming more than just light sources. They are now energy-efficient and smart technology-enabled features.
Skylights on roofs and walls have been around for a long time but now they are being evolved to add more beauty. In 2024, the roofing industry will see significant advancements. One key area is the integration of skylights. In Winnipeg, these innovations are reshaping roofing.
The connection between modern architecture and nature gives birth to the existence of skylights. This article deals with the magic of skylights and their impact on life.
Benefits of Skylights
Skylights have amazing benefits which are described below:
Apart from having great practical advantages, skylights also contribute to the beauty of the roofs and houses. Buildings can become more attractive as skylights add more persona to the place. You can soak in some amazing views as you go about your day, staying in touch with the beautiful world outside.
Skylights are beneficial because they introduce natural lighting inside the building. The skylights should be placed in areas that tend to get more lighting like the living room and kitchen. In this way, electricity consumption will also be reduced.
In Winnipeg, roof inspections reveal that skylights often have low emissivity (LowE) coatings. These coatings help control heat transfer. They reduce heat gain in summer and heat loss in winter. Adding thermal breaks and insulated frames improves skylights’ insulating properties. This makes skylights valuable for energy saving.
Types of Skylight In Your Roof
Skylights come in various types. Each type suits different needs. Common types include:
Fixed skylights are very common and easily available. These are placed on the ceilings of the buildings and are sealed shut. In this way, natural lights keep entering the place and the unwanted moisture and dirt are kept outside.
Ventilating skylights are better than fixed skylights, as they are not always sealed and can also be opened when needed. They let fresh air enter the place along with the natural lighting. Ventilating skylights are good for kitchens and bathrooms. They can be electrical as well as manual and are a great option if you are looking for something under affordable roofing Winnipeg.
This type of skylight uses a rooftop dome to trap the sunlight and then send this light into the building through a tube-shaped path. Tubular skylights are placed in hallways, bathrooms, and laundry rooms where it is harder for the natural light to reach.
Dome skylights are distinct for their dome-shaped design. Their shape gives them strength. Dome shape makes them well-suited for harsh weather conditions. Rain and snow slide off easily due to the curved surface. The dome shape also allows for even light distribution. They are often made from durable materials like polycarbonate. This adds to their resilience.
Trapezoidal skylights possess a very strong structure. The trapezoidal skylights are constructed by using thermoplastics, which are specially manufactured by companies.
Circular skylights are used to add an aesthetic touch to the room. Aluminum frames surround these skylights and their sizes lie in the range of 600-2500 mm in diameter.
Vaulted Polygon Skylights
The vaulted skylights are usually installed on inclined ceilings. These types of skylights are perfect for trapping natural light to the room and less finishing is required for installing them.
Barrel Vault Skylights
Barrel skylights are ideal for open hallways and corridors. Usually, barrel skylights are used to connect to opposite-facing vertical walls. The radius of these skylights depends upon the architectural conditions and beauty.
How to Choose Skylights
The correct choice of skylight relies upon many factors like the type of room, aesthetic preferences, and desired functionality:
In the living rooms and kitchens, north-facing skylights are usually installed, which keep the room lit up the entire day. The use of light bulbs is reduced due to the presence of these lights. Bedrooms often require east-facing skylights to trap the morning sunlight. While the west-facing sunlight is often used to capture the soft light in the evening.
Durable materials like tempered glass or polycarbonate are important. They should withstand local weather conditions.
Consider how it will look from both inside and outside your home. It should complement your home’s design. Choose based on your needs. Fixed skylights for light, ventilated for air and light, tubular for small spaces, etc.
Look for energy-efficient features. Low-E coatings, insulated glazing, and solar-powered options save energy.
Balance your needs with what you can afford. Higher quality might cost more but save money long-term.
Consider where to install it. The roof’s slope and direction affect sunlight and heat gain. North-facing skylights give constant light but less heat. South-facing ones offer more heat.
Check local building codes. They may have requirements for skylight installation.
Identify why you need a skylight. Is it for more light, air, or both? This affects the type you choose like fixed or ventilated.
Skylights are supposed to be appropriate if they provide all the functionalities and produce the desired effect. Skylights aim to provide natural light into the rooms for the whole day. They are also responsible for providing sufficient air circulation in smaller rooms like bathrooms and store rooms. The type of skylights also affects the room’s vibe.
Importance of Proper Skylight Orientation and Integration
Proper orientation of skylights and roof leak repair in Winnipeg is very essential, as it changes the entire look of the room where it is installed. Skylights must be placed on ceilings that are tilted towards the north, in this way soft light rays will keep entering for the entire day without any harmful glare effect.
Skylights that are tilted towards the south, often heat the room, such skylights are most suitable in colder areas like Manitoba.
Neglecting the proper integration of skylights produces odd geometry around the building. Skylights must be integrated into the design of the entire building so that it looks relevant and suitable.
Types of skylight glass
Plexiglass which is also famous as acrylic is used mostly in the construction of skylights. As a result, skylights are produced at reasonable prices. Plexiglass is lighter than glass and resistant to strong sun rays.
Tempered glass is made by heating a normal piece of glass and then cooling it. This glass is relatively much stronger. That’s why, it is often used in constructing roof lights.
Laminated glass is made by putting a sheet of vinyl in between two sheets of glass. The glass produced is really strong, and it’s an ideal material for skylights. Laminated glass blocks about 99% of harmful UV rays and also provides sound-proofing in the building.
Low-Emissivity (Low-E) Glass
Coated with a thin metallic layer. It reflects heat to its source. Keeps heat out in summer and in during winter. Energy-efficient choice.
Even stronger than plexiglass. Great for extreme weather conditions. Polycarbonate is more resistant to impact like hailing but less clear than glass.
Frosted or Opaque Glass
Diffuses light, providing privacy and even light distribution. Good for bathrooms or private spaces.
Has two or more panes with air or gas between them. It provides better insulation, reducing heat loss and noise.
Each type of skylight glass offers different benefits. The choice depends on factors like climate, location, and specific room needs.
Importance of Glass-strength, Load Duration, and Surface Damage Considerations
It is important to consider the glass strength before, installing the skylights. The glass is strong if it has the right amount of silica, soda ash, and lime.
Before installing skylights it is important to ensure the load duration of the skylights. The roof lights must be installed, by following the local building code of ASCE 7-95, and must support a load of 10 pounds per square foot, a minimum load of 20 pounds per square foot.
Surface damage considerations are equally important before installing skylights because they impact the light and air entering the room. The surface must be robust and last almost for 20-30 years.
DIY Installation Tips
Check from Attic
Get in the attic of the building to thoroughly check, the space where the skylights will be installed. Make sure that the area for skylights is a safe distance away from the electrical and water system of the building
Pay Attention to the structure
The location of the skylight is very important, to make sure that the skylight installation is not damaging the basic structure of the roof in any way.
Mind the Design
The structural design of the room has a huge impact on the type of skylight to be used. Mostly larger skylights are placed in rooms to enhance their appearance.
Buy a Self-Flashing Product
Before starting the DIY project, remember to buy a self-flashing product. In this way, time will be saved and the installation will be precise.
Use Proper Tools
Use appropriate tools to cut the marker area for skylight installation. Remember to always take precautionary measures before carrying out the process.
Frame the Skylight
It is necessary to seal the secure the skylight by using a proper frame. After fitting the frame use drywall and heavy-duty clay to secure the entire thing.
Steps for Professional Skylight Installation
Step 1: Cut the Roof Opening: Select a proper location for the installation, after selecting the right location, mark the spot. Safely cut that spot to install the system.
Step 2: Install the Flashing: Install flashing to stop water leakage around the sight, that’s why use proper cement for the sealing of edges, which makes the skylight stringer and prevents it from leaking.
Step 3: Place the Skylight: Place the skylight carefully into the marked spot, by perfectly fitting it. To secure the skylight, make use of nails and screws.
Step 4: Seal the Edges: Properly apply the cement around the skylight. In this way, the risk of water leakage will be reduced during weather conditions like rains and storms.
Step 5: Install Sill Flashing: Sill flashing is a great option to discard the water on the skylights. Nails and screws are often used to fix sill flashing on the roof, to prevent all sorts of leaks.
Step 6: Install Step Flashing: Water resistance in skylights is increased by using step flashing. While installing them make sure to carefully place the screws and hinges around the roof for good results.
Step 7: Counter Flashing: Counter flashing is used along with step flashing to prevent water leakages into the building. It is usually sealed on the roof by using cement.
Step 8: Saddle Flashing: Add saddle flashing along with other components to make the defence system of skylights even stronger. The saddle flashing is laid on top of the already present counter flashing to ensure full protection.
Step 9: Double Check: Finally, safely climb down the roof and get inside the building to get a proper look at the newly installed skylights. Check the proper working of skylights by opening and closing them, to confirm its flawless working.
Energy Efficiency and Lighting Control
Energy efficiency and lighting control in skylights are important for comfort and cost savings. Here’s how they work:
Skylights with double or triple-pane glass trap air or gas between layers. This insulation reduces heat loss in winter and heat gain in summer. Low-E Coatings reflect heat. They keep heat inside in winter and outside in summer, improving energy efficiency.
Proper installation and sealing prevent air leaks, enhancing energy efficiency.
Tinted or Reflective Coatings reduce glare and control the amount of sunlight entering through the skylight. Some skylights come with built-in shades or blinds. These can be manual or motorized, allowing control over light and heat.
Smart Glass or Electrochromic Glass changes its light transmission properties with electricity. Allows real-time control over light and heat entering the room.
Combining these features in skylights can significantly improve a home’s energy efficiency and provide better control over natural lighting. This leads to lower energy costs and increased indoor comfort.
Maintenance and Durability
Frequent maintenance and roof inspection in Winnipeg are required for the proper functioning of skylights. Materials used for the process of maintenance and different methods must be carried out by a professional to prevent the risk of leakage, waste accumulation, and fogginess of the skylights.
An annual inspection is also very important to reduce potential problems with dirty interiors that can be cleaned by using a microfiber towel. The use of strong chemicals tends to stain and scratch the glass.
There are many ways to increase the durability and lifespan of both glass roofs and skylights.
Use of appropriate materials:
Materials of good quality should be used for the glass and frame of the skylight so that the skylights are protected from the harsh UV rays and heat from the sun.
The skylights must be installed correctly to ensure their lifespan. The proper installation refers to the proper fitting of the glass and frames of the skylight, to avoid potential leaks and cracks.
To enhance their longevity skylights must be maintained frequently, including inspections and monitoring for potential damages. In this way, the life of both skylights and the roofs of the building will be assured.
Different Brands and Their Pricing
Velux Skylights is a top-notch skylight brand that offers all types and styles of skylights for buildings. Affordable Roofing Winnipeg works with Velux skylights because they are famous for their robustness Generally, Velux skylights lie in the range of $ 200 to $ 398 depending upon the location.
Fakro Skylights is another famous brand that has different shapes of s lights according to the building’s structure. Fakro produces high-quality skylights which are easy to install and are also eco-friendly and prices range from $1002.30 and onwards.
Sun-trek skylights are known to be budget-friendly with a built-in self-flashing feature. These skylights must be installed properly with the help of a professional skylights start from $160.
Gordon skylights are available at every store. These skylights do not only come with a warranty pricing depends upon the type and style of the skylight. The simplest type of skylight from Gordon Skylight is about $149.
Wasco Skylights is also a leading brand in the skylight industry. Their skylights are known for their self-flashing features. Their prices are quite high and are relatively easy to install.
The final cost per skylight depends on the size of the window and finishes to help block out UV rays or improve energy efficiency, and other customizations to fit the style and needs of your house.
The key factors that affect the cost of the skylights are the size of the roof, the fixed windows, the roof type, the location of the building, and the type of electrical work required.
Skylights play an important role in channelling natural lighting inside the building. In this way, the use of artificial lighting and energy consumption is reduced. Skylights provide beautiful views to the people inside the building, creating a fresh ambience for the room.
Apart from adding an aesthetic touch inside the room, skylights also add to the energy sustainability. The natural light entering the building helps in promoting a healthy lifestyle and productivity.
Skylight also enhances the architectural design of the building, making the place even more unique and attractive. From introducing natural lighting to contributing to health and well-being, skylights keep providing amazing benefits.
If you’re considering adding natural light and elegance to your home with skylights, Kenava Roofing in Manitoba is your ideal choice. Specializing in both installation and maintenance of skylights, their team of experts ensures that each installation is tailored to your specific needs, enhancing your living spaces with beautiful, natural light.
Don’t miss the opportunity to transform your home with this stunning addition. Contact Kenava Roofing today for a consultation and explore how skylights can bring a new dimension to your property.
Act now to brighten your home with the beauty and efficiency of professionally installed skylights by Kenava Roofing.